Industrial structures
Pipe racks, industrial buildings, frames and foundations in concrete and steel: record the defects and tests of each element, see the whole plant colored by condition and plan maintenance around what is most critical.
Freemium plan: free, with 1 user and 250 MB of storage. The platform interface is currently in Portuguese.
Boost productivity
Hundreds of repeated elements stop being a spreadsheet and become a model that shows where to act.
Pipe racks
In the pipe rack model, each frame beam and each pipe support opens the defects recorded and the tests performed on that element.
Industrial buildings
In an industrial building, the corrosion at the joints of a steel truss and the carbonation of a concrete column sit in the same model, each with photos and priority.
Durability
With the carbonation front measured, the platform estimates the remaining service life of each element and colors the model by risk.
Tests
Rebound hammer test, ultrasonic pulse velocity, core extraction, bond strength and anchor pull-out tests are linked to the tested element, with calculations, charts and conclusion.
Asset management
The dashboard brings together the plant's structures and shows where the GUT score and corrosion risk are highest. Ask DIAVICÃO for the report and take the numbers to the meeting.
Built for industry
Repeated frames, grid lines and supports are organized by location, system and element type.
Mark records on the drawing or see the results directly in the 3D model of the structure.
Defects and tests for reinforced concrete elements and for steel elements.
With offline work, data collection continues where there is no signal.
Engineering, maintenance and inspection companies access the same data.
Template-based or AI reports, in PDF and Word.
Demo
In a 30-minute conversation, we show the inspection, the tests and the 3D model with real data from a pipe rack and an industrial building.
Methodologies
Rebound hammer test, ultrasonic pulse velocity, core extraction, cracks, load tests and liquid penetrant.
See pageCarbonation front, corrosion potential, electrical resistivity and chlorides.
See pageMortar bond strength, ceramic tile bond strength and anchor pull-out test.
See pageDefects with photos, position on the floor plan and prioritization by the GUT method.
See pageFree trial
Use DIAVICON on a real project before you decide. As your operation grows, the paid plans add offline work, more users and storage, reports, dashboards, AI and the structure monitor.
Compare all plansQuestions
Didn't find your question?Write to contato@diavicon.com.
Any structure organized into elements: pipe racks, industrial buildings, frames, equipment foundations and others, in reinforced concrete or steel. Each element stores its own inspections and tests.
Yes. The visual inspection includes defects of steel elements, such as corrosion, and the liquid penetrant test records indications in welds and steel members.
On the Enterprise plan, you upload the structure model in .IFC or .GLB, link its members to the elements and see the model colored by the test results or by the GUT score of the inspection.
It does. Each defect receives a GUT score, added up by element and by location, and the dashboards show where the score and corrosion risk are highest. The decision remains with the responsible engineering team.
No. Inspection, tests, drawings, dashboards and reports work without the 3D model. The model is an additional feature of the Enterprise plan.
Create your free account to get to know the platform or book a demo.
Try it free
